To carry out a search by Address, you should enter the Screen Number in the first box. If it is a unit or an A or an RA (Rural Address) number enter only the street number for example.
Unit 4/1 Dalkeith Court, Sandy Bay
should be entered as 1 Dalkeith Court.
This will present the nearest
match to that address on a pick list from which you can select Unit 4.
You should enter the street
name in the second box, and the street suffix in the third box.
The suffix may be selected
from the drop down list, or simply enter the first letter for example S
= Street.(repeating the first letter will scroll through the whole
drop down list).
A pick list of the nearest
matches to you requested will be presented.
You then click on the button
at the left hand side of the list for the property you require, and then
click the Generate Property Report button.
Once the Property Information
Sheet is presented on the Screen you may
print the report.
The original pick list may
be retrieved by using the BACK ARROW of your browser, and then
further selections can be made.
You may also specify a particular
LAND USE CODE within a street (click on Help
to display Land Use Codes), or search on Surname and Given Names
(or initials), or the TITLE REFERENCE the UPI or the PID. If the system
has too little information to execute the search, a prompt message will
appear at the top of the Screen.
When searching for a company
(e.g. Acme PTY LTD) you must use the Company Name field. This can also
be used for people with one name.
When searching via a UPI
it must be a seven digit number e.g. 2101234. The first two digits (21)
represent the municipality Number (found on the printed map) the last 5
digits (01234) represent the UPI number with a 0 put in front. You may
find that this does not return a result due to the printed UPI number being
replaced due to the parcel being subdivided or amalgamated. In this case
use the Error Report Facility.
You may also search on PROPERTY
NAME. This particular field is case sensitive and needs to be in capitals.
If looking for the LANDS
BUILDING you could enter LANDS% thus using the WILDCARD % symbol.
This will result in the following screen being presented :-
The system has located any
occurrence of the letters LANDS, you may now make your selection in the
usual manner.
Property Names are
also available on rural properties.
